Acrylic Putty STATUS 100% 800gr 2121381008
Can be used for plastering or troweling any surface of plaster, wood, concrete, plasterboard, etc. while it is also ideal for trimming. It works easily and softly, does not run and fills evenly. It dries quickly without cracking and is easily rubbed, leaving a smooth and highly durable surface. It has strong adhesion, elasticity and resistance to ultraviolet radiation, moisture and frost.
Suitable for walls and ceilings, plaster, wood, concrete, plasterboard, etc.
Suitable for application where high tolerance is required for the contraction and expansion of cracks and joints between different structural elements
Suitable for plastering and troweling indoors and outdoors
Application Steps
Step 1
The surface must be strong, dry and free of dust, oils, limes, salts, loose materials, rust, puffy paints, mold, etc., to ensure good adhesion. The cracks are cleaned and any loose ones are removed. On surfaces with loose plasters, rub and prime with STATUS DUR WATER, diluted 100% with clean water
Step 2
Spread the putty without dilution, with a metal or plastic spatula, evenly
Step 3
It is applied in 1-2 layers, in thickness up to 0.5-1mm. The second layer is applied after the first one dries
Step 4
Sand the trowel with sandpaper after 1-2 hours and dust well
Step 5
Primer with the appropriate primer depending on the final surface. After application, close the container tightly to keep it in good condition for future use. It can be stored in a tightly closed container, without any problems, for a long time. It dries in 1-2 hours