Multi-Switch Νevoswitch 9x9x16 Televes 714603 12-40-0004

Oriented to the professional and to the complete flexibility of the initial installation but also of any planned or unplanned extension/addition, it has the possibility to be used both as a terminal and as a cascade (cascadable). Only with option 1 switch! Flexibility in the power supply methods: through the Power DC Jack (12 Vdc), through the V-Low input (12 Vdc), through the TERR input/output! In addition, giving 12 /18V to any output, the DC feeds through Terr and V-LOW input/output, pre-amplifiers, B.O.S.S. antennas, LNB or other NEVOSWITCH multiswitches, through the selection from Switch 1 (VDC). The NEVOSWITCH series was designed and operates with an ECO system that adjusts the consumption according to the load of the device, at any time, always maintaining the lowest possible consumption according to the conditions. If no user is connected and there is no 220V connection, the consumption will go to 0A.

Specifications:

• Type: 9x9x16
• Switch 1 (L.G/H.G -10db): SAT signal strength adjustment, depending on the installation data.
• Switch 2 (cascade/terminal): Selection of Terminal or Cascade mode.
• Bandwidth MHz: SAT 950-2400 , TER 88-862 Return 5-65
• Input level dBμV: SAT 102 , TER 104
• Transmission losses db: SAT 6 ± 2 , TER 3 ± 2
• Tap losses db (Att 10 dB) : SAT 950MHz: 3 ± 5, SAT 2400MHz: 13± 5
• Tap losses db (GAIN) : TER 7 ± 5
• Tap losses in the return path: TER 40 ± 5
• Isolation db: Polarity >40 , SAT In-Out >25
• LNB power supply: mA LNB Input max. 250 , TER Total 2A
• Operating voltage: Vdc 12
• DC pass through: In-Out /Out-In
• Consumption, maximum mA: 12Vdc power supply (PWR) H.G. 225, L.G. 135, Receiver (12/18V) 33 (35 mA + PSU POWER, if there is no PSU)
• Operating temperature C: -5 C... +45 C
• Degree of protection: IP20
• Dimensions: 208x255x30mm